Line Interface: Line A Shield and Line B Shield (JB2 and JB4)

These jumpers apply to the line interface. When one of these jumpers is in positions 1 and 2, it links RJ-11Pins 1 and 6 on the corresponding line to the interface module's frame ground. (If you are

using shielded twisted-pair cable, the shield can be connected to these pins). In positions 2 and 3, Pins 1 and 6 remain connected to each other, but are disconnected ("lifted") from frame ground.

JB2 Setting:

Positions 1 and 2 Line A Shield Connected

Positions 2 and 3 No Shield (default)

JB4 Setting:

Positions 1 and 2 Line B Shield Connected

Positions 2 and 3 No Shield (default)

CAUTION!

If you connect shield to frame ground, make sure that RJ-11 Pins 1 and 6,

as well as the cable shield, are connected to ground at one end of the cable

only. Connecting them at both ends of the cable will defeat the transformer

isolation and will leave your system open to damage from ground loops.

Serial Interface: Signal Ground and Frame Ground (JB5)

This jumper applies to the serial interface. In positions 1 and 2, this jumper links the Signal Ground (SGND) line (Pin 5) of both serial lines to the interface module's frame ground (FGND). When this

jumper is in positions 2 and 3, Pin 5 of both lines are disconnected ("lifted") from frame ground.

JB5 Setting:

Positions 1 and 2 SGND and FGND Connected

Positions 2 and 3 SGND and FGND Not Connected (default)

DSR tracks DTR (JB6 and JB7)

These jumpers MUST be left in their default positions. Because the interface module is designed to work with a whole family of products, and not just the Mini Driver MP Card, it is capable of

supporting some functions that are not used by the Mini Driver MP Card. Some products in this family might require these jumpers to be set differently, but the Mini Driver MP Card might malfunction

if either of these jumpers is in the wrong position. Make sure the jumper is placed across Pins 1 and 2. DO NOT place the jumper across Pins 2 and 3.

JB6 Setting:

Positions 1 and 2 DSR Tracks DTR (default)

Positions 2 and 3 N/A

INSTALLATION:

The MicroRacks: An Overview

Mini Driver MP Cards are designed to be installed in our MicroRacks (product codes RM202 for the 2-card models, RM204 for the 4-card models, RM208 for the 8-card models, and RM216 for the 16-card

models). You will install Mini Driver MP Cards in any MicroRack the same way.

The MicroRacks' Power Supply:

The power supply included with the MicroRacks uses the same mid-plane architecture as the line-driver cards. slide the front module of the power supply into the MicroRack from the front, and slide the rear

module in from the rear. The two modules plug into one another in the middle of the rack. Secure the front module with thumbscrews and the rear module with conventional metal screws; these screws and

thumbscrews come with the rack.

Switching the Power Supply ON and OFF:

The MicroRack's power switch is located on the power supply's front panel. When the MicroRack is plugged in and switched on, the power supply will light the red LED on its front panel. Since the

MicroRack is a "hot-swappable" rack, you don't have to install any cards before switching on the power supply. Also, the power supply may be switched off at any time without harming the installed cards,

and you can install or remove cards without turning off the power supply. However, you should always unplug the power cord before removing, replacing, or switching the power supply or its fuses.

1 2 3 4 5 6 7 8

Komentarze do niniejszej Instrukcji

Brak uwag

Sony CFD-S03CP manuály

Uživatelské manuály a uživatelské příručky pro Příslušenství pro míchačky / kuchyňské roboty Sony CFD-S03CP.
Poskytujeme 1 manuály pdf Sony CFD-S03CP ke stažení zdarma podle typů dokumentů: Uživatelský manuál

Sony CFD-S03CP Uživatelský manuál (2 strany)

Značka: Sony | Kategorie: Mixer/food processor accessories | Velikost: 0.49 MB |

Tabulka s obsahem

CD Radiokasetofon

Mjere opreza

U slučaju problema

Ostale funkcije

Další produkty a příručky pro Příslušenství pro míchačky / kuchyňské roboty Sony

Modely	Typ Dokumentu
DCR-TRV480E	Uživatelský manuál Sony DCR-TRV480E Upute za upotrebu, 150 stránky
CMT-CPZ3	Uživatelský manuál Sony CMT-CPZ3 CMT-CPZ3 Hi-Fi sistem mikro komponenti Uputstva za rukovanje, 4 stránky
CMT-DX400	Uživatelský manuál Sony CMT-DX400 DX400 Mikro Hi-Fi komponentni sustav Upute za upotrebu, 36 stránky
RHT-G1500	Uživatelský manuál Sony RHT-G900 Upute za upotrebu, 40 stránky
BDP-S790	Uživatelský manuál Sony BDP-S790 Blu-ray Disc™ reproduktor s Wi-Fi® tehnologijom Upute za upotrebu, 56 stránky
DAV-TZ140	Uživatelský manuál Sony DAV-TZ140 DVD sistem kućnog bioskopa Uputstva za rukovanje, 32 stránky
DSC-T100	Uživatelský manuál Sony DSC-T100 Upute za upotrebu [en] , 148 stránky
MHC-EC68	Uživatelský manuál Sony MHC-EC68 Navodila za uporabo, 20 stránky
MEX-BT2900	Uživatelský manuál Sony MEX-BT2900 BT2900 Glavna Bluetooth® mp3/CD jedinica Upute za upotrebu, 32 stránky
STR-DG710	Uživatelský manuál Sony STR-DG710 Upute za upotrebu, 76 stránky
STR-DA5400ES	Uživatelský manuál Sony STR-DA5400ES Upute za upotrebu, 148 stránky
CDX-NC9950	Uživatelský manuál Sony CDX-NC9950 Upute za upotrebu, 40 stránky
CMT-SPZ50	Uživatelský manuál Sony CMT-SPZ50 Upute za upotrebu, 2 stránky
CDX-F7750S	Uživatelský manuál Sony CDX-F7750 Upute za upotrebu, 20 stránky
BDV-EF1100	Uživatelský manuál Sony BDV-EF1100 Blu-ray sustav kućnog kina Upute za upotrebu, 70 stránky
CMT-U1BT	Uživatelský manuál Sony CMT-U1BT Upute za upotrebu, 33 stránky
CDX-GT410U	Uživatelský manuál Sony CDX-GT410U Upute za upotrebu [en] , 20 stránky
MEX-M70BT	Uživatelský manuál Sony MEX-M70BT CD imtuvas su BLUETOOTH® belaidžio ryšio technologija Naudojimo instrukcijos, 92 stránky
DVP-FX780	Uživatelský manuál Sony DVP-FX780 Prijenosni DVD reproduktor s USB priključnicom Upute za upotrebu, 24 stránky
DAV-DZ660	Uživatelský manuál Sony DAV-DZ660 Upute za upotrebu [th] , 116 stránky

Connect Tech JB2 Dokumentacja Strona 5

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Connect Tech JB2

Sony CFD-S03CP manuály

Sony CFD-S03CP Uživatelský manuál (2 strany)

Tabulka s obsahem

Další produkty a příručky pro Příslušenství pro míchačky / kuchyňské roboty Sony