Connect Tech JB1 Instrukcja Użytkownika Pobierz pdf (Strona 9)

Product Overview 1

Product Overview

The Xtreme/104 Opto adapters are high performance multi-port

serial adapters in a PC/104 form factor that allow you to connect

up to 4 serial devices.

Your Xtreme/104 Opto product consists of the following

components:



Xtreme/104 Opto adapter.

 Xtreme/104 Opto DOS, Windows 95/98/Me, Windows CE,

Windows XP, Windows 2000 and QNX 4.X device drivers.

Note:

1. If you did not receive a driver diskette for your operating system or

you require additional information, please go to the Download Zone

of the Support Center on the Connect Tech website for product

manuals, installation guides, device driver software, diagnostic

utilities and updates.

2. You can also order standard cables for the Xtreme/104 Opto

Xtreme/104 Opto Adapter

Xtreme/104 Opto adapters provide high speed interfaces between

a host computer and multiple external serial devices. Xtreme/104

pto adapters include features such as: O



Two or four asynchronous serial ports.

 Both RS-232 and RS-422/485 electrical interfaces. The

interfaces are jumper selectable for each port.



Multiple Xtreme/104 Opto adapters may reside in a system.

 16C2850 dual UARTs control each port. The 16C2850 has

128 byte TxD and RxD FIFO buffers for each port and

automatic software/hardware flow control.

 Each port has independent baud rate selection offering baud

rates from 50 bps – 230.4 Kbps (RS-232) and 50 bps – 460.8

Kbps (RS-422/485), with 5, 6, 7 or 8 data bits and 1, 1.5, 2

stop bits, odd or even parity.

 On board jumpers allow the selection of 8 predefined I/O

address sets.

 On board jumpers allow the selection of 1, 2 or 4 IRQ lines.

You can choose from interrupts 3, 4, 5, 6, 7, 9, 10, 11, 12, 14

and 15.

Xtreme/104 Opto User's Manual, ver. 0.03

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Brak uwag

Connect Tech JB1 Instrukcja Użytkownika Strona 9