Connect Tech FREE FORM/PCI-104 104 Instrukcja Użytkownika Pobierz pdf (Strona 23)

Connect Tech FreeForm/PCI-104 User Manual

Revision 0.07 23

5) When prompted with the following messages, click OK and Cancel

6) Right click on the FPGA, and click ‘Assign new Configuration File’

7) Browse to the reference design directory, and select the bitstream (.bit)

Example: {REFDIR}\fpga\\ise_projects\ref_design_fcg001rd\ref_design.bit

8) A prompt will ask if you wish to attach a SPI file or BPI Prom. Click Yes.

9) Browse to the reference design directory, and select the prom bile (.mcs)

Example: {REFDIR}\fpga\\ise_projects\ref_design_fcg001rd\ ref_design_fcg001rd.mcs

10) A prompt will ask to select the attached SPI. Choose M25P32 and click ok

Note: Select “M25P16” (16 Mb flash) if using a FCG00x Rev B, FCG00x Rev C, or a FCG00x Rev D. with assembly

Date 09/2009). To identify the flash size, refer to Appendix D: Identifying Configuration Flash Size

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 38 39

Brak uwag

Connect Tech FREE FORM/PCI-104 104 Instrukcja Użytkownika Strona 23